Smittybilt 561035 C-RES (Cargo Restraint System) User Manual

Installation instructions c-res

Advertising
background image

WWW.SMITTYBILT.COM

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

C-RES

(Cargo Restraint System)

Part # 521035 (92-95 Wrangler)
Part # 561035 (97-06 Wrangler)




NOTE: You will need to have the following to install this part correctly.

1. (YJ) Softop retaining channels on the side and corners of the body tub.
(OEM or aftermarket will work), Tailgate retaining bar and brackets.
2. (TJ) Tailgate retaining bar and brackets.

Step 1: Remove or fold down, your existing soft top and bow assembly (If equipped)
If you fold down you your top make sure bow assembly is all the way down and
top is tucked in per manufacturers instructions.

Step 2: Unfold the C-RES top and lay it our over the rear of the vehicle. (Fig A)

Step 3: Starting on the driver side attach the plastic channel in the top into the front edge of
retaining channel the body tub next to the door opening. Then continue down the side
and around the rear corners. (Fig B) Repeat on the passenger side.

(Fig A)

(Fig B)


Step 4: Begin fastening the 3 straps along the top around the sport bar. (Fig C) Do not fully
tighten at this time.

Please read instructions entirely before installing this part

Advertising
This manual is related to the following products: