Smittybilt 90105 Windshield Header - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Windshield Header (Part #90105)
07-09 Jeep Wrangler
Step 1: Remove the two plastic knobs and brackets from header. (Fig A)
Step 2: Slide header into brief and snap brief onto header (Fig B)
Step 3: Lay header on top of windshield frame. (Fig C) Do not secure brief on vehicle
at this time.
(Fig A) (Fig B)
Step 4: Once header is on top of the windshield frame insert knobs from top down while
holding the clamp on the bottom of the header and begin to fasten together.
Make sure extended tab of clamp is resting next to inside of windshield frame.
(Fig D)
Note: Carefully read instructions first before installing this product.
Remove both knobs and brackets
before installing.