Smittybilt 76721 Rock Crawler Front Bumper User Manual

Installation instructions

Advertising
background image

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 1600 Walnut Parkway, Rancho Dominguez, CA 90220

Installation Instructions

Rock Crawler Front Bumper #76721
1987-06 Jeep Wranglers


NOTE: Carefully read entire instructions thoroughly before attempting
to assemble and/or install this product.

Smittybilt is in no way

responsible for any damage to the vehicle or personal injury that

may

occur during the installation or use of this product.

CAUTION: This

product is designed primarily to enhance the appearance of the vehicle.
Do NOT rely on it in any way to protect against injury or death in the
event of an accident. “ALWAYS WEAR YOUR SEAT BELT “

Parts Included Qty

Tools Needed

Front Bumper 1

Ratchet with # 55 Torx Bit


Section One

1. Remove factory bumper (If applicable) by removing the two top and two bottom bolts. Note: Save

hardware for later use.

2. Carefully place front bumper on factory frame. Align the holes in the bumpers mounting plate with the

holes in the frame. Mount using the factory hardware you removed in Step 1















NOTE:

To protect your investment, wax this product after installing. Regular waxing is recommended. Do not use any type of polish/wax

that contains abrasives that could damage the finish.


Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and
conditions, be proven defective in material or workmanship within the warranty period of 3 years from the date of purchase, such defect(s) will be
repaired or replaced (At the Company’s option) without charge for parts or labor. This warranty does not apply to any product or part thereof
which, in the opinion of the Company, has suffered or been damaged through altercation, improper installation, mishandling, misuse, neglect
accident or acts of nature. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT.

Factory
Bolts

Vehicle Frame

Front
Bumper
Frame

Advertising