Smittybilt SB76856 XRC Bumper - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W Artesia, Compton, CA 90220
Revised 12.1.09
Installation Instructions:
XRC Bumper (Part # SB76856)
2007 Jeep JK XRC Rear Bumper
w/ Tire Carrier
Step 1: Remove the factory rear bumper and hardware from the vehicle.
Step 2: Drill out the (4) holes in the center of the frame to ½”. (Fig A)
Parts Included Qty
BOX 1
91-5441 REAR BUMPER 1
91-5433 TIRE CARRIER: ADJUSTABLE MOUNT 1
90-3925 NUT PLATE 2
90-6581 HARDWARE PACK: BUMPER 1
1/2”-13 X 4 1/2” GR. 8 HEX BOLT 4
1/2”-13 X 1 1/4” GR. 8 HEX BOLT 4
1/2” USS FLAT WASHER 8
1/2” SAE WASHER 4
1/2” HEX NUT 4
BOX 2
93-5439 TIRE CARRIER: XRC 1
93-5436 SRC SPARE TIRE CARRIER BRACE 1
93-5567 3rd Brake Light Bracket: Upper 1
90-6299 Hardware Pack: 3rd Brake Light Bracket 1
93-5569 3rd Brake Light Bracket: Lower 1
90-6689 HARDWARE PACK: HANDLE 1
90-2940 NYLON WASHER 2
90-4218 CIRCLE CILP 1
90-4219 LUG NUTS 3
90-4214 TIRE CARRIER HANDLE ASSEMBLY 1
90-6690 HARDWARE PACK: TIRE CARRIER 1
3/8"-16 X 1 1/4" HEX BOLT GR. 8 2
3/8"-16 X 1 3/4" HEX BOLT GR. 8 2
3/8"-16 X 2 1/2" HEX BOLT GR. 8 2
3/8"-16 STOVER NUT 6
3/8" SAE FLAT WASHER 8
1/2”-13 STOVER NUT 4
1/2”-13 FLAT WASHER 4
5/16”-18 X 3/4” SS BUTTONHEAD BOLT -Not Used 1
90-4217 ZERK FITTING 1
Parts Included Qty
3/8” X 1” Hex Head Self Tapping Bolt 2
Existing rear
frame center holes
(Fig A)
CAUTION: This bumper is not rated for towing. It is “accessory” friendly only i.e.
bike rack, hitch step, receiver rack.