Smittybilt D8005 Axe & Shovel - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Axe & Shovel
Universal
Part # D-8005
Parts Included Qty Parts Included Qty
Ax & Shovel Mount (D-8005) 1 3/8” Flat Washers 2
Hardware Pack (D-8005-HP) 3/8” Lock Washers 2
3/8” Wing Nut 2
Step 1: Find a suitable mounting location for the axe & shovel mount.
Step 2:
Using the mount as a template, set on your desired location then mark and drill
4 -3/8” mounting holes.
Step 3:
Attach the mount with 5/16” bolts, flat washers, lock washers, and nuts
(not included).
Step 4:
Tighten all hardware.
NOTE:
This is a universal mount and hardware is not included due to the numerous
variations of mounting possibilities. It is recommended to use grade 5 or higher
hardware when mounting.
Please read instructions entirely before installing this product.