Smittybilt AM12 Defender Rack Adjust-A-Mount - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
Defender Rack Adjust-A-Mount
Application-Universal
Part # AM4, AM6, AM8
AM10, AM12
Part# AM4
Parts Included Qty Parts Included Qty
Hinge mount (AM) 4
1/4“ lock washer 8
“L” bracket (D8107A) 4 5/16”x3/4” bolt 16
Hardware Kit (AM-4-HP) 5/16” flat washer 32
1/4” well nut 8 5/16” lock washer 16
1/4”x.75” 8 5/16” nut 16
1/4” flat washer 8
Part# AM6
Parts Included Qty Parts Included Qty
Hinge mount (AM) 6
1/4“ lock washer 12
“L” bracket (D8107A) 6 5/16”x3/4” bolt 24
Hardware Kit (AM-6-HP) 5/16” flat washer 48
1/4” well nut 12 5/16” lock washer 24
1/4”x.75” 12 5/16” nut 24
1/4” flat washer 12
Part# AM8
Parts Included Qty Parts Included Qty
Hinge mount (AM) 8
1/4“ lock washer 16
“L” bracket (D8107A) 8 5/16”x3/4” bolt 32
Hardware Kit (AM-8-HP) 5/16” flat washer 64
1/4” well nut 16 5/16” lock washer 32
1/4”x.75” 16 5/16” nut 32
1/4” flat washer 16
Please read instructions entirely before installing this product. Drilling is
required to install this product.