Kinesis, Usb foot switch family, User’s manual – Kinesis FS32AJ-JSB Savant JSB Foot Pedal User Manual
Page 3: Joystick button emulation)
USER’S MANUAL
Kinesis
®
JSB
™
USB foot switch family
(joystick button emulation)
For any USB system capable of providing generic HID joystick drivers for USB joysticks
Models covered:
FSMJ2-JSB: control module only, with two input jacks
FSMJ4-JSB: control module only, with four input jacks
FS12J-JSB: control module with two input jacks, one pedal
FS22A-JSB: dual angled pedals mounted on steel base
FS22AJ-JSB: dual angled pedals mounted on steel base with one jack for optional input device
FS32A-JSB: triple angled & adjustable pedals, mounted on steel base
FS32AJ-JSB: triple angled & adjustable pedals, mounted on steel base. Jack for optional input
Optional input accessories
FS007mp: single foot pedal with mini-phono plug
FS002HT8: Hand trigger, 8 foot cable with mini-phono plug.
*Waterproof (IPX8) models are available by special order.
September 2014 Edition
© 2010
-2014 by Kinesis Corporation. All rights reserved. Printed in the U.S.A. on recycled paper. Please recycle! The Kinesis
website is located at www.kinesis.com. KINESIS is a registered trademark of Kinesis Corporation. JSB is a trademark of Kinesis
Corporation. Information in this document is subject to change without notice. No part of this document may be reproduced or
transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of
Kinesis Corporation.
Cover: Triple pedal model shown (FS32A-JSB)