Addictive Desert Designs 2010 - Current Dodge RAM 2500 54 Radius Bar Roof Mount User Manual
Addictive desert designs
Advertising
Addictive Desert Designs
2010 - Current Dodge RAM 2500
54” radius bar roof mount
Installation instructions
PREPARATION STEPS
1. Disconnect the negative terminal on the battery. With the vehicle on level ground and the
emergency brake set.
2. You will need the following tools:
a. Drill
b. 1/4” Drill Bit
c. 1/4” Rivets (6)
d. Tape Measure
Note: This installation requires 2 people for best results
3. Included in Kit:
a. Right Mount(1)
b. Left Mount(1)
Advertising