Addictive Desert Designs 2009 – 2014 Ford F150 Series Radius Bar Roof Mount User Manual

Page 3

Advertising
background image

4. With the bracket in position, mark and drill the three holes with the 1/4” drill bit and install the

rivets and bracket according to the rivet tool manufacturer’s instructions. Repeat for the other
side.

5. Replace the molding on both sides and wire the light according to instructions included with the

light.




6. If you drive a 2013-2014 Ford Raptor your windshield wipers should look like the picture below

and trim 2” off top edge of driver and passenger sides as shown.

Advertising