Snorkel SL30RT-sn13300+ User Manual

Operator manual, Sl-26/30rt, Safety rules

Advertising
background image

12

ITEM

Platform Size (Inside Toeboards)

Standard

w/ Extension

Max. Platform Capacity

Standard

w/ Extension

on Extension

Max. No. Of occupants

Standard

on Extension

Height

Working Height

Max. Platform Height

Min. Platform Height

Dimensions

Weight

Overall Width

Overall Height

Overall Length

Derivable Height

Surface Speed

Platform Lowered

Platform Raised

System Voltage

Hydraulic Tank Capacity

Maximum Hydraulic System

Pressure

Hydraulic Fluid

Normal Use (>32 °F [0 °C])

Low Temp. Use

(-10 to 32 °F [-23 to 0 °C])

Lift System

Lift Speed

Power Source

Drive Control

Control System

Horizontal Drive

Tires

Parking Brakes

Turning Radius (inside)

Maximum Gradeability

Wheel Base

Guardrails

Toeboard

SL-26RT

67.5 in. X 141.5 in. [1.71 m x 3.59 m]

67.5 in. X 181.5 in. [1.71 m x 4.61 m]

1500 lbs. [680kg]

1500 lbs. [680kg]

500 lbs. [110 kg]

5 people

2 people

32 ft. [9.75 m]

26 ft. [7.93 m]

59 in. [1.5 m]

Kohler Gas 5,890 lbs. [2672 kg]

Kubota Gas 6,020 lbs. [2731 kg]

Kubota Diesel 6,080 lbs. [2757 kg]

84 in. [2.13 m]

102.5 in. [2.60 m]

149 in. [3.79 m]

26 ft. [9.75 m]

0 to 3.1 mph [0 to 5.0 km/h]

0 to .5 mph [0 to .8 km/h]

12 Volt DC

12 Gallons [45.5 l]

2500 psi [172 bar]

ISO #46

5W-20 Motor Oil

One Single Stage Lift Cylinder

Raise, 21 sec./Lower, 32 sec.

20 HP Kohler Magnum, 20 HP Kubota WG750,

20 HP Kubota D905 (Diesel)

Proportional

Proportional Joystick Controller with Interlock

Four Wheel, Hydraulic Motors

26 x 12.00 - 12 NHS Super Terra-grip with Trac Seal

Two, Spring Applied, Hydraulic Release, Multiple Disc

13 ft. [3.96 m]

35% [19°]

100 in. [2.54 m]

43.5 in. [1.11 m] high, Fold Down with Gate

6 in. [152 mm] High

SL-30RT

67.5 in. X 166.25 in. [1.71 m x 4.22 m]

N/A

1300 lbs. [590 kg]

N/A

N/A

5 people

N/A

36 ft. [10.97 m]

30 ft. [9.14 m]

59 in. [1.5 m]

Kohler Gas 6,200 lbs. [2812 kg]

Kubota Gas 6,330 lbs. [2871 kg]

Kubota Diesel 6,390 lbs. [2898 kg]

84 in. [2.13 m]

102.5 in. [2.60 m]

173 in. [4.39 m]

30 ft. [10.97 m]

0 to 3.1 mph [0 to 5.0 km/h]

0 to .5 mph [0 to .8 km/h]

12 Volt DC

12 Gallons [45.5 l]

2500 psi [172 bar]

ISO #46

5W-20 Motor Oil

One Single Stage Lift Cylinder

Raise, 24 sec./Lower, 36 sec.

20 HP Kohler Magnum, 20 HP Kubota WG750,

20 HP Kubota D905 (Diesel)

Proportional

Proportional Joystick Controller with Interlock

Four Wheel, Hydraulic Motors

26 x 12.00 - 12 NHS Super Terra-grip with Trac Seal

Two, Spring Applied, Hydraulic Release, Multiple Disc

13 ft. [3.96 m]

35% [19°]

100 in. [2.54 m]

43.5 in. [1.11 m] high, Fold Down with Gate

6 in. [152 mm] High

FOR MORE INFORMATION

Local Distributor:

USA

TEL: (800) 926-5438 or (559) 891-5200

FAX: (559) 896-9012

PARTS: (888) UR-PARTS

PARTSFAX: (559) 896-9244

1775 Park St., Selma, CA 93662

http://www.upright.com

060588-013

12/99 D

Safety

Rules

and

Operating

Instructions

Safety

Rules

and

Operating

Instructions

Specifications*

* Specifications subject to change without

notice.

Hot weather or heavy use may reduce

performance.

Meets or exceeds all applicable requirements

of OSHA and ANSI A92.6-1999
Refer to Service Manual for complete parts

and service information.

1

SL-26/30RT

SAFETY RULES

Operator Manual

SL-26/30RT

SERIAL NO. 13300 to Current

NEVER operate the machine

within ten feet of power lines.

THIS MACHINE IS NOT IN-

SULATED.

NEVER elevate the platform or

drive the machine while el-

evated unless the machine is

on a firm level surface.

NEVER sit, stand or climb on

guardrail or midrail.

WARNING

All personnel shall carefully read, understand and follow all safety rules,

operating instructions and the Scaffold Industry Association’s MANUAL OF

RESPONSIBILITIES (ANSI A92.6) before performing maintenance on or operating

any UpRight aerial work platform.

Safety

Rules

and

Operating

Instructions

Safety

Rules

and

Operating

Instructions

NEVER operate the machine without first surveying the work area for surface hazards such as

holes, drop-offs, bumps and debris before operating machine.

NEVER operate the machine if all guardrails are not properly in place and secured with all fasten-

ers properly torqued.

SECURE gate across entrance after mounting platform.

NEVER use ladders or scaffolding on the platform.

NEVER attach overhanging loads or increase platform size.

LOOK up, down and around for overhead obstructions and electrical conductors.

CHECK all four tires for correct inflation. See Specifications.

DISTRIBUTE all loads evenly on the platform. See the back cover for maximum platform load.

NEVER use damaged equipment. (Contact UpRight for instructions, see toll free number on back cover.)

NEVER change operating or safety systems.

INSPECT the machine thoroughly for cracked welds, loose hardware, hydraulic leaks, damaged

control cable, loose wire connections and wheel bolts.

NEVER climb down elevating assembly with the platform elevated.

NEVER perform service on machine while platform is elevated without blocking elevating assembly.

NEVER recharge batteries near sparks or open flame; batteries that are being charged emit

highly explosive hydrogen gas.

AFTER USE secure the work platform against unauthorized use by turning key switch off and

removing key.

NEVER replace any component or part with anything other than original UpRight replacement

parts without the manufacturers consent.

California Proposition 65 Warning

Gasoline and diesel engine exhaust and some of their constituents are known to the

State of California to cause cancer, birth defects, and other reproductive harm.

Advertising
This manual is related to the following products: