Snorkel SPM20 CE-sn0001+ User Manual
Page 38
35
Tilt Sensor
•
Program
•
Tilt Sensor
•
Allows viewing current tilt sensor individual X and Y direction degree reading.
Program
•
Allows programming of the items shown in Table 3-4, the following is a brief explanation of
each programming item.
NOTE: There are two production modules available at this time, one for North/South
American and European languages, and one for Asian languages. All programmable
items between these modules are identical with the exception of language selection.
Back To Main
•
– When selected, will return to main level menu.
Set Language
•
– Selects the language that text on the LCD screen will be displayed.
Set Sleep Time-
•
Allows setting the length of time the machine will remain powered up
without control input before powering itself down.
Set Polarity of Keypad Code
•
– Turns on or off the Programmable Security Lock switch
circuit, if equipped.
Enable Detection of Horn Open Circuit
•
– Enables horn electrical circuit to be turned on
(YES) or off (NO) if machine is equipped with a horn.
Enable Detection of Beacon Open Circuit
•
– Enables mast/base beacon strobe electrical
circuits to be turned on (YES) or off (NO) if machine is equipped with either or both
beacon strobes.
Forward Alarm Disable
•
– When turned on (YES) will disable the alarm when driving
forward.
Table 3-4. SPM20 Ground Control Station – Level 3 – Programmable Settings and
Factory Presets.
Level-3: Operator Programmable Settings On LCD Display: YES=√ HIGH=↑
NO=× LOW=↓
LEVEL
PROGRAMMABLE ITEM
FACTORY
PRESET
SETTING RANGE
3
Back to Main
—
Return to Main Menu
3
Set Language
NOTE: There are two production
modules available at this time, one for
North/South American and European
Languages, and one for Asian
Languages.
1
1- English 6 - Italian
2- German 7- Swedish
3- Dutch
8- Brazilian Portuguese
4- French 9- Finnish
5- Spanish
2
1- English
2-Chinese
3- Japanese
3
Set Sleep Time
5 MINS
0-60 MINS
3
Set Polarity of the Keypad Code
LOW
HIGH/LOW
3
Enable Detection of Horn Open Circuit
NO (a)
YES/NO
3
Enable Detection of Beacon Open
Circuit
NO (a)
YES/NO
3
Forward Alarm Disable
NO
YES/NO
3
OSS Diagnostics
NO
YES/NO
Notes: (a) SPM20 Models this feature is standard equipment and preset to YES at factory.