Snorkel ECO 6-sn4223+ - Manual (Page 24)

Page 23 of 23 Pop-Up PUSH 6 ECO Operator’s Safety and Maintenance Handbook (v.0.4.0409)
Section 7
MAINTENANCE AND
REPAIR RECORD
At POP-UP Products we welcome any feedback and suggested
improvements for our product. Please email us at feedback@
popupproducts.co.uk
Daily checks – operator checklist
The following checklist has been provided to enable daily checks to be
undertaken prior to use of this POP-UP PUSH 6 ECO . These checks should
be carried out each working day or at the beginning of each shift. The
purpose of the checks is to identify any wear and tear or malfunction of the
machine’s components and systems.
WARNING
FAILURE TO UNDERTAKE THESE CHECKS MAY RESULT IN DEFECTS ON, OR
DETERIORATION OF THIS POP-UP PUSH 6 ECO GOING UNDETECTED AND
POSSIBLY RESULTING IN AN UNSAFE MACHINE
Note that Regulation 8 of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER)
require that persons using lifting equipment have appropriate training and instructions to enable them
to identify whether lifting equipment is safe to use.
1. Prior to operating the platform, the following items must be checked:
(please refer to the relevant sections in this handbook for more detail.)
OK? (please tick) OK? (please tick)
Structure Battery condition
Platform Raise and lower
Castors Emergency stop
Brakes Emergency lower
Oil leaks Safety decals and training card
Date
Checked by
2. Use raise, lower and emergency stop functions to ensure correct operation.
Should any defects be identified in any of the above areas, these should be reported to your supervisor or
employer. It may be necessary to seek further assistance from the supplier of the machine, this may be the hire
company or the manufacturer.
You should only rectify any defects if you are authorised and competent to do so.
Do not use the machine unless each of the items above is checked and stated OK.
Machine number