Chapter 5 – gauges and displays, Battery charge indicator, Battery condition indicator – Snorkel S3219E-sn000000+ User Manual

Page 17: Diagnostic center display

Advertising
background image

S3219E/S4732E – 1500834

13

The aerial platform is equipped with several gauges to

monitor the condition of the machine before and during

operation.

Battery Charge Indicator

The battery charger has three LED’s (refer to Figure 5.1)

which indicate the charger status.

Figure 5.1 –Rear of Chassis

The LED’s are visible on the battery tray.

• 30% red LED blinking – indicates that the batteries

are 0% to 30% charged.

• 60% red LED blinking – indicates that the batteries

are 30% to 60% charged.

• 90% red LED blinking – indicates that the batteries

are 60% to 90% charged.

• 100% green LED solid On – indicates that the charge

cycle is complete.

Battery Condition Indicator

The battery condition indicator (refer to Figure 5.2) is

located on the top of the upper control panel. When the

light comes on, the lift function is cut out and drive speed

is reduced to slow.

Figure 5.2 – Top of Upper Controls

Diagnostic Center Display

The diagnostic center LCD display (refer to Figure 5.3)

is located in the control valve tray on the right side of the

machine.

Figure 5.3 – Diagnostic Center LCD Display

When the battery disconnect and emergency stop but-

ton at the lower controls are in the on position, the LCD

display shows:

• The accumulated aerial platform operating time

• The available battery power to operate the machine.

Chapter 5 – Gauges and Displays

LED Charge Indicators

Battery Condition Indicator

Advertising