Snorkel SRT2670 User Manual
Snorkel Special machinery
Advertising
Table of contents
Document Outline
- Table of Contents
- Electrical Hazard
- Introduction
- 1. Safety
- 2. Safety Devices
- Safety Device Information 2-1
- Emergency Stop Switches 2-1
- Alarms 2-1
- Guardrails 2-3
- Safety Prop 2-3
- Swinging Gate (option) 2-3
- Safety Control 2-3
- Bubble Level (outrigger machines only) 2-4
- Operator Horn (option) 2-4
- Outriggers (option) 2-4
- RCD/ELCB AC Outlet (option) 2-4
- Flashing Light (option) 2-5
- Lanyard Anchor Points (option) 2-5
- 3. Specifications
- 4. Gauges
- 5. Automatic Shut-offs and Circuit Breakers
- 6. Controls
- 7. Daily Inspection and Maintenance
- Daily Inspection and Maintenance Table 7-1
- Fuel level 7-2
- Fuel filter (diesel engines only) 7-2
- Fuel leaks 7-2
- Engine oil 7-3
- Engine coolant 7-3
- Radiator cap 7-3
- Swinging gate (option) 7-3
- Wiring harnesses and connectors 7-4
- Battery terminals 7-4
- Hydraulic tank cap 7-4
- Hydraulic oil level 7-4
- Hydraulic oil leaks 7-5
- Tires and wheels 7-5
- Bolts and fasteners 7-6
- Structural damage & welds 7-6
- Guardrails 7-6
- Lanyard anchorages (option) 7-6
- Bubble level (machines with outriggers) 7-7
- Guides, rollers, and slides 7-7
- Charging system 7-7
- Level sensor 7-7
- Ground controls 7-8
- Emergency lowering 7-8
- Platform controls 7-8
- Flashing light (option) 7-8
- RCD / ELCB (option) 7-9
- Air filter 7-9
- Safety prop 7-9
- Parking brakes 7-9
- Placards and decals 7-10
- 8. Operation
- 9. Emergency Operation
- 10. Stowing and Transporting
- 11. Options
- 12. Fire Fighting and Chemical Containment
- 13. Operator's Troubleshooting
- Index
- !
- A
- B
- C
- Charging syatem, 7-7
- Circuit Breakers, 5-2
- Collapsed height, 3-1
- Controls
- Control Switches
- AC Outlet, 6-4
- Battery, 6-2, 8-2, 8-3, 8-5, 8-6, 9-3
- Choke, 6-2, 6-4, 8-3, 8-6
- Emergency Stop, 6-2, 6-4, 8-1, 8-2, 8-3, 8-5, 8-6, 8-7, 8-8, 9-1
- Fuel, 6-2
- Glow-Plug, 6-2, 6-4, 8-4
- Ground/Platform Selector, 6-2, 8-2, 8-4, 8-5, 8-6
- Hydraulic Oil Warm-Up, 6-2, 8-4
- Key, 6-2
- Lift/Drive Selector, 6-4, 8-7, 8-8
- Main Power, 9-2
- Outriggers, 6-5, 8-8
- Platform Lift/Lower, 6-2, 8-4
- Speed, 6-4, 8-7
- Start, 6-4
- Indicator Lights
- Joystick Controller, 6-4, 8-7, 8-8
- Joystick Safety Control, 6-4, 8-7, 8-8
- Steering, 6-4
- Control Switches
- Crushing hazard, 1-2
- D
- E
- F
- G
- H
- I
- L
- M
- N
- O
- Operating Procedures, 8-1
- Bubble Level, 8-9
- Control Stations, 8-1
- Emergency Stopping, 8-1
- Extending the platform, 8-10
- Operating From Ground Control Box, 8-2
- Operating From Platform Control Box, 8-5
- Outriggers, 8-8
- Raising the outriggers, 8-9
- Raising the platform, 8-4, 8-8
- Setting the outriggers, 8-8
- Warming the hydraulic oil, 8-4
- Operator Horn, 11-1
- Operators
- Outriggers, 8-8, 11-1
- Overall height, 3-1
- Overall length (with stabilizers), 3-1
- Overall length (without stablizers), 3-1
- Overall weight, 3-1
- Operating Procedures, 8-1
- P
- Q
- R
- S
- Safe Operation, 1-1
- Safe working load (main deck), 3-1
- Safe working load (roll out deck), 3-1
- Safety Decals and Placards, 1-3
- Safety Devices
- Safety precautions
- Safety prop, 7-9
- Signs, Caution, Danger, Notes
- Spark Arrestor, 11-2
- Speed (maximum drive), 3-1
- Speed (when raised), 3-1
- Standard colour, 3-1
- Stowing the SRT, 10-1
- Structural damage and welds, 7-6
- Swinging gate, 7-3, 11-2
- T
- W