Snorkel TB60 2001 User Manual
Page 59
10. DAILY INSPECTION & MAINTENANCE
10 - 7
P/N 0082168
14.Guardrails
Visually inspect the guardrails to see that none
of the tubing has been cut out, removed, nor
deformed in any way. Visually check the
guardrail welds to see that none is cracked nor
ground down.
15. Platform gravity gate
Inspect the gravity gate to be sure it is present
and moves freely.
16. Self-closing gate (option)
Inspect the self-closing gate, at the platform
entrance, to see that it swings freely, latches
securely, and is not deformed in any way.
17. Lanyard anchor points
Neither lanyard anchor point should be visibly
deformed, cut, nor worn. The welds should not
be cracked nor ground down.
18. Emergency power motor/pump
D A N G E R
When the turntable rotates clockwise (CW)
it will move directly toward you. When you
check TURNTABLE SWING at CW (1) be
sure you have room to step backward.
Check each of the five boom-moving switches
(3), using EMERGENCY POWER (2), to see
that they work correctly. Check both positions
of each switch (3). (For correct emergency
power operating procedures see the
“EMERGENCY OPERATION” chapter.)