Aries Automotive 5050 - Manual

2006- 08 DODGE RAM 1500 SERIES
INSTALLATION INSTRUCTIONS
GRILL GUARD #5050
PART LIST
1 GRILL GUARD
2 LOWER BRACKETS ( DRIVE + PASSENGER)
2 OUTER LOWER BRACKET
2 UPPER BRACKETS
10 7/16 X 1 ¼ HEX BOLT
10 7/16 HEX NUT
10 7/16 FLAT WASHER
2 ¼ X ¾ PHIL PAN HEAD SCREWS
2 ¼ HEX NUTS
PROCEDURE:
1. REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY
ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2. REMOVE LOWER URETHANE VALANCE LOCATED UNDERNEATH
FRONT BUMPER TEMPORALLY AND SET ASIDE. (SEE FIG #1).
3. UNBOLT (2) EXISTING NUTS LOCATED ON OUTER SIDE OF FRAME
RAIL (DRIVER SIDE SHOWN) INSTALL LOWER BRACKET ONTO
OUTER FRAME NAIL BOLTS. LEAVE LOOSE. (SEE FIG #2)
4. INSTALL OUTER LOWER BRACKET USING (3) 7/16 X 1¼ HEX BOLT (3)
7/16 FLAT WASHER (3)7/16 HEX NUT, LEAVE LOOSE (DRIVER SIDE
SHOWN). (SEE FIG#2)
5. REPEAT PROCEDURE #2-3 ON OPPOSITE SIDE
6. INSTALL (1) GRILL GUARD ONTO DRIVER AND PASSENGER OUTER
LOWER BRACKETS, USING (4) 7/16 X 1 ¼ HEX BOLTS (4) 7/16 FLAT
WASHER (4) 7/16 HEX NUTS. LEAVE LOOSE. (SEE FIG #3)