Aries Automotive 3065-2 - Manual (Page 6)

GRILLE GUARD
2011 -12 FORD EXPLORER
Page 5 of 7 6/17/11 (DP)
18-1/2"
19-1/2"
Driver Side Installation Pictured
Front
Cut as little as possible to clear
brackets. Do not cut through the
top or bottom edge of splash guard
Draw lines to represent
the top and the bottom
of the Frame Bracket
Illustrations, diagrams and
measurements provided for
example only. It is the installer's
responsibility to determine exact
cuts/modifications to the vehicle
required for proper installation.
Fig 9
Fig 10
Fig 8
Fig 11
(3) 12mm x 35mm Hex Bolts
(6) 12mm Flat Washers
(3) 12mm Nylon Lock Nuts
Front
Front
Middle of bumper/spoiler insert
location pictured from back of bumper