Aries Automotive 9041 - Manual

(888) 800-ARIES
INSTALLATION INSTRUCTIONS
FRONT BAR PART #9041
1998 NISSAN PATHFINDER
QTY. CONTENT
1 ONE PIECE GRILL/BRUSH GUARD
2 FRAME MOUNTING BRACKETS
6 7/16 X 1 1/4” HEX BOLTS
6 7/16 HEX NUTS
12 7/16 FLAT WASHERS
STEP 1 REMOVE TOW HOOKS FROM FRONT SECTION OF THE VEHICLE.
STEP 2 USING BOLTS THAT HOLD THE TOW HOOKS IN PLACE ATTACH THE MOUNTING BRACKETS (TWO BOLTS PER HOOK). THERE IS AN
ADDITIONAL HOLE FOR EXTRA SUPPORT, YET NOT NEEDED.
STEP 3 .LEAVE THE MOUNT BRACKETS LOOSE WHILE ATTACHING THE GRILL/BRUSH GUARD TO THE BRACKET.
STEP 4 ATTACH THE FRONT BAR ASSEMBLY TO THE LOWER FRAME BRACKETS, USING THE 7/16 X 1 ¼ HEX BOLTS, 7/16 HEX NUTS AND
WASHERS
STEP 6 ALIGN FRONT BAR ASSEMBLY WITH FRONT OF VEHCILE AND SECURE ALL BOLTS AND NUTS.
FINISH PROTECTION- ARIES PRODUCTS HAVE A HIGH FINISH THAT MUST BE MAINTAINED SUCH AS ANY OTHER HIGH FINISH PRODUCT
ON THE VEHICLE. PROTECT THE FINISH WITH A NON-ABRASIVE AUTOMOTIVE WAX. THE USE OF SOAP, POLISH, OR WAX THAT CONTAINS
ABRASIVES IS DETRIMENTAL, AS THE COMPOUNDS SCRATCH THE FINISH AND OPEN IT TO CORROSION.
DISCLAIMER- BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER FROM THE INSTALLATION AND USE OF ARIES PRODUCTS. ARIES
PRODUCTS ARE SOLD AS DECORATIVE ACCESSORIES AND SHOULD NOT BE RELIED UPON AS PROTECTION FOR THE VEHICLE OR
OCCUPANTS IN THE EVENT OF A COLLISION OR ROLL OVER. ARIES AUTOMOTIVE ASSUMES NO LIABILITY FOR INJURY, LOSS, INCIDENTAL
OR CONSEQUENTIAL DAMAGES IN THE EVENT OF A COLLISION OR ROLLOVER
.