Aries Automotive 9042 - Manual

INSTALLATION INSTRUCTIONS
FRONT BAR PART 9042
1999 ½ to 2004 NISSAN PATHFINDER
PARTS LIST
1-
FRONT BAR
2- BOTTOM FRAMES MOUNTING BRACKETS
1- SUPPORT BRACKET
2- ¼ X ¾ SCREWS
2- ¼ HEX NUTS
12- 7/16 FLAT WASHERS
6- 7/16 X 1 ¼ HEX BOLTS
6-7/16 LOCK NUTS
INSTALLING THE MOUNTING BRACKETS
Remove the inside bolt from the tow hook (and bolt beside it) from the splash pan. Set
mount brackets in place and replace bolts semi loose, as you might have to move the
bracket around to align front bar. Note: The mount bracket has a spare hole that could
be used for extra support.
INSTALLING THE FRONT BAR
Line up the three holes on the lower portion of the front bar with the holes on the mount
brackets outer edge. Using 7/16 hardware and washers fasten bar to the mounting
brackets. After the front bar is attached to the mounting brackets, align the bar to the
bumper. Once satisfied with alignment tighten all bolts securely.