Aries Automotive P4068 - Manual

PARTS LIST:
1 Grille Guard 10 12mm x 24mm OD x 2.5mm STD Flat Washers
1 Driver/Left Top Bracket 12 12mm x 32mm OD x 3mm Large Flat Washers
1 Passenger/Right Top Bracket 12 12mm Nylon Lock Nuts
2 Frame Mounting Brackets 2 10-1.50mm x 25mm Button Head Bolts
2 Lower Frame Support Brackets 4 10mm x 20mm x 2mm Flat Washers
2 12-1.75mm x 40mm Bolt Plates (#11) 2 10mm Nylon Lock Nuts
2 12mm Plastic Retainers 2 600mm x 50mm x 1.0mm Adhesive Backed Foam Tape
2 12-1.75mm x 140mm Hex Bolts 1 6mm Allen Wrench
8 12-1.75mm x 30mm Hex Bolts 1 Support Flange
2 8mm Nut Clips 2 8mm Flat Washers
2 8mm Hex Bolts 2 8mm Lock Washers
PROCEDURE:
1. REMOVE CONTENTS FROM BOX AND VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY. DO NOT ATTEMPT INSTALLATION ALONE; PERSONAL INJURY OR DAMAGE TO
THE VEHICLE MAY RESULT. CUTTING IS REQUIRED.
2. Start by Selecting your LED light (Sold Separately) mounting hardware & brackets, you will need to first
attached the hardware to the support flange, (Example of LED light attached Fig 1) NOTE: if you have
your own LED light, LED Manufactures will have similar but different mounting styles or brackets,
once you determine you mounting options attach it to the support flange as seen in (Fig1)
Frame
Mounting
Bracket Frame
Mounting
Bracket
Driver/Left Top
Bracket
Passenger/Right Top
Support Bracket
(2) Lower Support Brackets
(2) 12mm x 40mm Bolt
Plates (pictured w/hardware)
Adhesive Backed
Foam Tape
INSTALLATION INSTRUCTIONS
2007-13 SILVERADO 1500
PART # P4068
(2) 8mm Nut Clips
Support Flange
Page 1 of 6