Aries Automotive P5058 - Manual

PARTS LIST:
Qty Description Qty Description
1 Grille Guard 12 12-1.75mm Hex Nuts
2
Upper Frame Mounting Brackets (for trucks
without tow hooks only)
4 8mm x 20mm Button Head Allen Bolts
1 Driver/Left Lower Frame Mounting Bracket 4 8mm x 22mm OD x 2mm Flat Washers
1
Passenger/Right Lower Frame Mounting
Bracket
4 8mm Lock Washers
1 Driver/Left Upper Support Bracket 2 5-.8mm x 15mm Button Head Allen Bolt
1 Passenger/Right Upper Support Bracket 4 5mm x 10mm OD x 1mm Flat Washers
1 Driver/Left Lower Support Bracket 2 5mm Nylon Lock Nuts
1 Passenger/Right Lower Support Bracket 1 Support flange
2
12-1.5mm x 30mm Special Fine Thread Hex
Bolt (for trucks without tow hooks only)
2 8mm Nut clips
1 Wrench 2 8mm hex bolts
8 12-1.75mm x 35mm Hex Bolts 2 8mm Flat washers
22 12mm x 32mm OD x 3mm Flat Washers 2 8mm Lock washers
14 12mm Lock Washers
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. CUTTING IS REQUIRED. ASSISTANCE IS
RECOMMENDED.
Passenger/
Right Lower
Mounting
Bracket
Driver/Left
Lower
Mounting
Bracket
Passenger/Right
Support Bracket
(2) Upper Frame Bracket
(will fit left or right)
Driver/Left Support Bracket (Support
Brackets pictured in position for
installation on tow hook equipped
vehicles. Reverse direction for vehicles
without tow hooks)
Passenger/
Right Top
Bracket
Driver/Left
Top Bracket
INSTALLATION INSTRUCTIONS
2009-13 DODGE RAM 2 & 4WD 1500
PART # P5058
Support Flange
(2) 8mm Nut Clips
Page 1 of 7
10/30/2013