Aries Automotive P2062 - Manual

PARTS LIST:
1 Grille Guard 4 12mm Lock Washers
1 Driver/Left Frame Mounting Bracket 4 12mm x 32mm OD x 3mm Flat Washers
1 Passenger/Right Frame Mounting Bracket 4 10-1.50mm x 35mm Hex Bolts
1 Driver/Left Top Mounting Bracket 4 10mm Lock Washers
1 Passenger/Right Top Mounting Bracket 12 10mm x 27mm OD x 3mm Flat Washers
1 Driver/Left Top Bracket 6 10mm Nylon Lock Nuts
1 Passenger/Right Top Bracket 2 600mm x 50mm x 1.0mm Adhesive Foam Strips
2 10mm Double Bolt Plates 1 Support Flange
2 10mm Quick Release Bolts 2 8mm Nut clips
2 10mm Special Pivot Washers 2 8mm hex bolts
4 12mm Plastic Washers 2 8mm Flat washers
4 10mm Plastic Washers 2 8mm Lock washers
4 12-1.75mm x 35mm Hex Bolts
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. NOT RECOMMENDED FOR VEHICLES WITH
OPTIONAL "ACTIVE" LASER GUIDED CRUISE CONTROL SYSTEMS.
(2) 10mm Double Bolt Plates
Driver/Left Side Top
Mounting Bracket
Passenger/Right Side
Top Mounting Bracket
Driver/Left side Frame
Mounting Bracket
Passenger/Right side
Frame Mounting Bracket
10mm Quick Release Bolts
10mm Special Pivot Washer
10mm Flat Washers
10mm Nylon Lock Nut
Passenger/Right
Side Top Bracket Driver/Left Side
Top Bracket
INSTALLATION INSTRUCTIONS
2007-13 TUNDRA 2008-13 SEQUOIA
(Skid plate must be removed if equipped)
PART# P2062
Support Flange
(2) 8mm Nut Clips