Figure 2 figure 1 – Aries Automotive 205001-2 User Manual
Page 2
2
FINISH PROTECTION-
ARIES PRODUCTS HAVE A HIGH FINISH THAT MUST BE MAINTAINED SUCH AS ANY
OTHER HIGH FINISH PRODUCT ON THE VEHICLE. PROTECT THE FINISH WITH A NON-ABRASIVE
AUTOMOTIVE WAX. THE USE OF SOAP, POLISH, OR WAX THAT CONTAINS ABRASIVES IS DETRIMENTAL, AS
THE COMPOUNDS SCRATCH THE FINISH AND OPEN IT TO CORROSION.
DISCLAIMER-
BUYER ASSUMES ALL RISK AND LIABILITY WHATSOEVER FROM THE INSTALLATION AND
USE OF ARIES PRODUCTS. ARIES PRODUCTS ARE SOLD AS DECORATIVE ACCESSORIES AND SHOULD NOT BE
RELIED UPON AS PROTECTION FOR THE VEHICLE OR OCCUPANTS IN THE EVENT OF A COLLISION OR ROLL
OVER. ARIES AUTOMOTIVE ASSUMES NO LIABILITY FOR INJURY, LOSS, INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN THE EVENT OF A COLLISION OR ROLLOVER.
Aries Automotive
Accessories, Inc.
P.O. Box 1687
Lomita, CA 90717
Thank you for choosing Aries products
For Customer Service Support please
call: (888) 800-2743
STEP 6:
STEP 7:
STEP 8:
STEP 9:
Fix auxiliary bracket up to vehicle with the long end down. Secure top of
brace with “T” bolt flat washers, lock washers, and nuts as shown in Figure
2. Leave loose.
Secure bottom of bracket using the 3/8 x 1” hex. head bolt.
Torque all hardware as follows: 3/8” hardware to 25 Ft. Lbs., ½” hardware
to 65 Ft. Lbs., and factory bolts to 55 Ft. Lbs. Repeat for passenger side.
You may need to periodically re-tighten the fasteners on your sidebar.
FIGURE 2
FIGURE 1