Aries Automotive 203034-2 - Manual

PART # 203034 / 203034-2
1998-09 FORD RANGER STND/REG CAB / 1998-09 MAZDA STND/REG CAB
1
ITEM
1
2
3
4
5
6
7
8
9
10
QTY
1
2
2
2
4
2
10
10
4
2
CONTENTS
Sidebar Set (Driver & Passenger)
Front Mounting Brackets
Rear Mounting Brackets
Rear Auxiliary Mounting Brackets
½ x 1 ½” hex head bolt
M12 x 100mm hex head bolt
½” Flat washer
½” Lock washer
½” Hex nut
M12 Hex nut
TOOLS
¾” Socket
18mm Socket
19mm Socket
Ratchet
STEP 1:
STEP 2:
STEP 3:
STEP 4:
Read and understand instructions completely before beginning installation.
Sidebar set consists of a driver and passenger sidebar. Be sure to
determine the correct side before installation.
To install front mounting bracket, locate the factory bolt that is located on
the floor inside the cab of the vehicle in front of driver’s seat beneath the
carpet. Then remove the patch that covers the bolt. Replace the factory bolt
with the M12 x 100mm hex head bolt. Place front mounting bracket and
secure to the bolt using ½” flat and lock washers and M12 hex nut. Leave
loose.
To install rear mounting bracket, place the rear auxiliary mounting bracket
between the rail of chassis and the rear mounting support. Secure rear
mounting bracket to auxiliary mounting bracket using ½” flat & lock washers
and hex nuts. Leave hardware loose.
INSTALLATION INSTRUCTIONS