Aries Automotive 200008-2 - Manual

2006-08 GRAND VITARA
PART # 200008 / 200008-2
Page 1 of 2
PART LIST
INSTALLATION STEPS
λ Please read this installation Menu before installing this part. When install it, pay attention to
protecting your vehicles.
λ When use it, please check this parts at a fix time - lapse, such as one month or two month.
No. NAME QTY REMARKS No. NAME QTY REMARKS
○ 1 SIDE STEP (Lef t .Side) 1 FLAT WASHER 4 12mm
○ 2 SIDE STEP (Right. Sidel) 1 ○ 9 CAPSCREW 4 M 8×25
○ 3 FRONTBRACKET (Dr. Side) 1 LOCK WASHER 4 8mm
○ 4 FRONT BRACKET( Pass. Side) 1 M10Ч25Ч1.25 FLAT WASHER 4 8mm
○ 5 REAR BRACKET(Dr. Side) 1 10mm ○ 10 Threaded Bar 8 M 10×40
○ 6 . REAR BRACKET(Pass. Side) 1 LOCK WASHER 8 10mm
○ 7 THREADED PLATE 2 FLAT WASHER 8 10mm
○ 8 HEX NUT 4 M12 HEX NUT 8 M10
LOCK WASHER 4 12mm
1. Insert Thread Plate # 7 inside chassis hole "A" on the passenger side so that its other threaded bar would expose from chassis holes "B" according to Pic. No 1.
2. Place Front Bracket # 4 so that Thread Bar # 7 expenses through it. Screw with nuts # 8 & # 9.
ATTENTION
INSTALLATION INSTRUCTIONS