Aries Automotive 202006-2 - Manual

APPLICATION: 1999-06 TOYOTA TUNDRA EXTENDED CAB
INSTRUCTIONS
5,6 2 REAR BRACKET
7 1 FRONT MOUNT TAB ASSEMBLY, PASSENGER
8 1 FRONT MOUNT TAB ASSEMBLY, DRIVER
9 2 SPACER WASHER
10 6 1/2-13 X 1.75” HEX HEAD BOLT
11 8 1/2” FLAT WASHER
12 8 1/2” LOCK WASHER
13 4 1/2-13 HEX NUT
1,2 2 STEP BAR, PASSENGER (1) AND DRIVER (2)
3,4 2 FRONT BRACKET, PASSENGER (3) AND DRIVER (4)
, PASSENGER (5) AND DRIVER (6)
QTY CONTENTS - TOOLS -
3/4” SOCKET
3/4” WRENCH
6” EXTENSION
RATCHET
TORQUE WRENCH
2004-06 TOYOTA TUNDRA DOUBLE CAB
ITEM
STEP BAR ASSEMBLIES
STEP 1. Remove the contents from box and check for damage. Verify all parts are present. Read instructions com-
pletely before beginning.
Locate the rectangular holes in frame towards the front of the vehicle. Insert front mount tab assemblies into
the hole from the inside of frame. Attach front brackets as shown. Hand tighten.
Attach rear brackets as shown. Hand tighten. Place the spacer washer under the head of the hex
head bolt and insert through frame from the inside of frame.
Attach step bars as shown. Hand tighten.
Make sure step bar and brackets are properly aligned with vehicle and tighten fasteners. Recommended torque
value is 64 Ft. Lbs. for 1/2” fasteners.
STEP 2.
STEP 3.
STEP 4.
STEP 5.
NOTE:
FINISH PROTECTION
Aries products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive au tomotive wax, (e.g.
Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to
corrosion.
1
3 4 7
5 6 8
202006-2
RECTANGULAR
FRAME HOLE
FOR
WARD
9
5
3
12
12
12
12
11
11
10
10
10
13
13
11
11
7
8
1
INSTALLATION VIEW OF PASSENGER SIDE, DRIVER SIDE OPPOSITE INSTALLATION VIEW OF PASSENGER SIDE, DRIVER SIDE OPPOSITE
PLACE BEHIND BODY MOUNT
ON DOUBLE CAB.
ARIES