Aries Automotive S229008 User Manual
Part list, Assembly procedure, Install picture
INSTALLATION INSTRUCTION
4 INCH STRAIGHT OVAL SIDE BAR Part#
229008
NISSAN X-TERRA 05-11
Page 1 of 1
Note and Products Care:
λ
Pictures are only for reference. Actual products may be slightly different but installation is the same.
λ
Read Carefully the instruction sheet before installing. Take good care of your vehicle when installing to prevent any
scratch.
λ
Check periodically to see if there’s any loose bolts and nuts to ensure safe driving. Protect the finish with a
non-abrasive automotive wax on a regular basis.
Part list:
NO.
NAME
QTY REMARKS NO.
NAME
QTY REMARKS
○
1
Side bar
2
○
5
Big washers
24
8mm
○
2
L- Mount bracket
3
○
6
Lock washer
12
8mm
○
3
R- Mount bracket
3
○
7
Lock nut
12
M8
○
4
Hex bolt
12
M8×25
Assembly procedure:
Step 1：
Check all the contents are available in accordance with the above list (Parts list).
Step 2：
Install the mounting bracket using○
5
○
7
and factory threaded studs.
Step 3：
Install the side bar to mounting bracket using○
4
○
5
○
6
.
Step 4：
After checking for proper clearance and alignment of the
side bar
on the vehicle, fully tighten all
hardware.
Step 5：
Installation done.
○
1
○
2
FRONT
Mounting panel
○
5
○
7
○
4
○
5
○
6
Factory 8mm
threaded studs
Install picture