Aries Automotive S222009-2 - Manual

Adjust Side Tube so that it is level and centered, and tighten all bolts to complete the driver-side
4. Repeat process for passenger side of vehicle to complete installation.
3. Attach Side Tube to Front, Center and Rear Brackets
S222009 / S222009-2
2005-13 TOYOTA TACOMA CREW CAB SHORT BED 2/4WD
lock washers, Snug but do not tighten at this time.
using (6 ) 10mm hex bolts, (6 ) 10mm flat washers & (6 ) 10mm
(12)10MM FLAT WASHERS
(12)10MM X 30MM HEX HEAD BOLTS (12)10MM LOCK WASHERS
INSTALLATION INSTRUCTIONS
SIDE BAR PART #
PARTS LIST
(2) SIDE TUBES WITH STEPS
(2) FRONT MOUNT BRACKETS (12) 8MM x 30MM 1.25 PITCH HEX HEAD BOLTS
(2) CENTER BRACKETS (12) 8MM FLAT WASHERS
(2) REAR MOUNT BRACKETS (12) 8MM LOCK WASHERS
PROCEDURE
1. Begin installation by working on driver side of the vehicle.
2. Remove plastic plugs on rocker panel to locate mounting holes for brackets. Attach and secure Front, Center,
and Rear Mount Bracket to existing holes using 8MM bolts, 8MM flat washers, and 8MM lock washers. For
each outer hole and hand tighten.
assembly.