Aries Automotive S222012-2 - Manual

4. Repeat process for driver side of vehicle to complete installation.
Adjust Side Tube so that it is level and centered, and tighten all bolts to complete the driver-side
3. Attach Side Tube to Front, Center and Rear Brackets
(12) 10MM FLAT WASHERS
(12) 10MM X 30MM HEX HEAD BOLTS (12 10MM LOCK WASHERS
SIDE BAR PART # S222012 / S222012-2
2007-13 TOYOTA DOUBLE CAB
INSTALLATION INSTRUCTIONS
PARTS LIST
(2) SIDE TUBES WITH STEPS
(2) FRONT MOUNT BRACKETS (12) 8MM x 30MM 1.25 PITCH HEX HEAD BOLTS
(2) CENTER BRACKETS (12) 8MM FLAT WASHERS
(2) REAR MOUNT BRACKETS (12) 8MM LOCK WASHERS
PROCEDURE
1. Begin installation by working on driver side of the vehicle.
2. Remove plastic plugs on rocker panel to locate mounting holes for brackets. Attach and secure Front, Center,
and Rear Mount Bracket to existing holes using 8MM bolts, 8MM flat washers, and 8MM lock washers. For
each outer hole and hand tighten.
lock washers, Snug but do not tighten at this time.
using (6 ) 10mm hex bolts, (6 ) 10mm flat washers & (6 ) 10mm
assembly.