Aries Automotive 25630 - Manual

carrier secure tire with the 12mm nuts (Fig 1)
factory studs, once
12mm Hex Nuts
PARTS LIST:
Qty Description Qty Description
1 Tire Relocation carrier 3
PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ
INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION.
2. Start by removing the spare tire, once tire is removed select the tire relocation carrier slide it over
the tire studs on the factory tire carrier and begin to secure it with
secured place the spare tire onto the tire relocation
shows relocation bracket attached
3. Do periodic inspections to the installation to make sure all hardware is secure and tight.
Page 1 5/31/2012
INSTALLATION INSTRUCTIONS
2007-12 JEEP JK TIRE RELOCATION CARRIER
Part 25630
Tire Relocation carrier