Aerovent IM-121 User Manual

Im-121, Centrifugal powered roof & wall exhausters, Models

Advertising
background image

©2014 Aerovent

Receiving, Inspection & Unpacking

General Installation

When the equipment is received all items should be

carefully checked against the bill of lading to be sure all

crates and cartons have been received. Before accept-

ing delivery, carefully inspect each carton or crate for

visible shipping damage. If any damage is noticed, the

carrier should make the proper notation on the delivery

receipt acknowledging the damage. Make notations of all

damage on all copies of the bill of lading and have all

copies countersigned by the delivering carrier. The car-

rier should also fill out a Carrier Inspection Report. The

factory Traffic Department should then be contacted.

File claim for damage with the carrier. Physical damage

to the unit after acceptance is not the responsibility of

Aerovent.

Unpack each carton or crate and verify that all required

parts and proper quantities of each item have been

received. Refer to drawings for part descriptions. Report

shortages or missing items to your local representative

to arrange for replacement parts.
Due to availability of carriers and truck space, it is not

possible to guarantee that all items will be shipped

together. Verification of shipments must be limited to

only those items on the bill of lading.
The unit nameplate must be checked to make sure the

voltage agrees with the power supply available.

CAUTION: Sheet metal parts, screws, clips and similar

items inherently have sharp edges, and it is necessary

that the installer and service personnel exercise

caution.
The installation of this equipment shall be in accordance

with the regulations of authorities having jurisdiction and

all applicable codes.

This equipment is to be installed by an experienced

installation company and fully trained personnel.
The mechanical installation of the exhaust ventilator con-

sists of making final connections between the unit and

building services, duct connections.

Centrifugal Powered Roof & Wall Exhausters

Models

ACXD, ATD, ATDR, ATDW, ATDWR,

ACX, ATB, ATBR, AWX, AWXR

Aerovent Catalog 102 provides additional information on this equipment. This catalog can be found at

www.aerovent.com or by contacting your local Aerovent sales representative.

General Installation, Operation and Maintenance Instructions For Aerovent Products

General Installation, Operation and Maintenance Instructions For Aerovent Products

IM-121

August 2014

®

Advertising