Aerovent IM-135 - Manual

Filtered Air Supply Fans
©1997 Aerovent
Detail Mounting of Flat Type Curb Base on Existing Roof
Use Hydro Shield and heavy-duty glass
membrane — Addex Corporation (or
equal).
1. Set ventilator curb base in mastic.
2. Apply mastic over curb base flange.
3. Work membrane into mastic.
4. Trowel mastic over membrane and work
in.
The roof mounted filtered air supply fan consists of two basic sections: the intake head with filters and the base. The standard
base includes the belted panel fan and is designed for curb mounting with a 4" turndown. Illustrations below show both curb and
flat base type.
General Installation, Operation and Maintenance Instructions For Aerovent Products
IM-135
June 1997