Advance Adapters 716133 - Manual

ADVANCE ADAPTERS INC. P/N: 716133
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 01-06-12
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 716032 CONVERTER SUPPORT
2. 3 716039 FLEX PLATE SPACER
3. 2 716045 ALIGNMENT PINS
4. 1 716133-BLK ADAPTER PLATE
5. 6 723704 3/8" LOCK WASHER
6. 3 723705 3/8"-24 NUT
7. 4 723723 3/8"-16 x 1-1/2" H.H.C.S.
8. 3 723748 3/8"-24 x 1-1/4" H.H.C.S.
9. 4 723753 3/8"-16 x 1-1/4" F.H.C.S.
CHEVY ENGINE INSTALLATION
CONVERTER SUPPORT BUSHING
PRESS INTO CRANK
STEEL ADAPTER HAS BOTH
CHEVY & BUICK BOLT PATTERNS
BOLT PLATE TO BLOCK USING FLAT
HEAD CAP SCREWS
JEEP AMC TURBO 400 TO
CHEVY & BUICK ENGINES
BOLT FLEX PLATE TO CRANK
USING BOLTS PROVIDED
STOCK AMC OR GM CONVERTERS WILL NEED TO BE SPACED BACK
FROM THE FLEX PLATE USING THE SPACERS FURNISHED IN THIS
KIT. USE WITH 3/8"-24 X 1-1/4" BOLTS, WASHERS, & NUTS.
Note: This kit can be used with a
Gen3 Chevy V8 but must be used in
conjunction with kit number 712500A.
Both kits provide a crank support
bushing, these must be pressed
together before being pressed into
the Gen 3 crank that is recessed
.400" from a Gen 2 crank.