BUSH DAB+/FM/AM Digital Radio TR82DAB - Manual (Page 8)

Bush TR82DAB
Turning on your DAB+ Radio
1. Connect the Power lead to the power socket on the back of the unit. Then connect the power lead to the mains
wall outlet.
2. To switch on, turn the On/Off & Volume Control to the right. Press the DAB+ Button. When DAB Mode is
selected for the first time, the display will illuminate and welcome to DAB will be displayed. Then carefully
extend antenna for the best possible reception.
3. When you turn on your DAB+ Radio for the first time it will conduct a full station scan and store all the available
Radio Stations in the stations list. This may take a few minutes.
#
Note: a. The DAB+ stations will be displayed in alphanumeric order. The first station in the list will be played
after the scan has been completed.
b. If no DAB+ signal is found in your area, it may be necessary for you to relocate your radio.
Changing Stations
To scroll through the station list and change the DAB+ Station playing, press the Navigation Buttons (left and right
arrows on the top of the radio). Press the Buttons repeatedly to scroll through the list. The stations will be displayed
on line 3 of the display.
Adjusting the Volume
To adjust the volume turn the volume wheel, located on the top of the radio. To increase the volume turn it to the
right and to decrease the volume turn the wheel to the left.
Tone Dial
The tone dial is used to alter the audio output of the DAB digital radio between a high (treble) and low (bass)
frequency range. Turn the tone dial right to enhance the high frequency (treble) content of the sound output. Turn
the tone dial left to enhance the low frequency (bass) content of the sound output.
8