Advance Adapters 50-0226 User Manual

Kit consists of

Advertising
background image

ADVANCE ADAPTERS INC.

P/N: 50-0226

P.O. Box 247, 4320 Aerotech Center Way

New Item: (09/97)

Paso Robles, CA 93447

PAGE 1 OF 3

Telephone: (800) 350-2223

Fax: (805) 238-4201

Page Rev. Date:

12-18-09

SPECIAL NOTE:

The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components

will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly

recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We

recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally

available at automotive dealerships and parts stores.

KIT CONSISTS OF:

No.

Qty

Part No.

Description

1.

1

51-0224

ADAPTER CASTING

2.

1

52-0226

16 SPLINE SPUD SHAFT (23T INTERNAL)

3.

1 Kit

715532

TRANSFER CASE LINKAGE BRKT. ASSY.

4.

1

716199

RETAINER

5.

1

716301

SEALED BEARING

6.

1

716507

GASKET

7.

8

720046

10mm-1.5 x 40mm LONG

8.

2

723735

3/8" FLAT WASHER

9.

2

723739

3/8"-16 x 7/8" H.H.C.S.

10.

5

724303

7/16" LOCKWASHERS

11.

8

724324

7/16" HIGH COLLAR LOCK WASHER

12.

3

724345

7/16" x 14 x 5" HEX HEAD BOLT

13.

2

724349

7-16" x 14 x 1-1/2" H.H.C.S.

14.

1

728701

NYLON NUT

15.

1

728702

7/8" FLATWASHER

16.

1

TLC001

LAND CRUISER INSTRUCTION MANUAL

17.

1

NV001

NV INSTRUCTION MANUAL

NOTE:

This adapter kit has an overall transmission assembled length of 18.750". This kit will work

ONLY

with Dodge NV4500

gas transmissions having 23 spline output.

CAUTION:

There are two 3/8" holes located on the side of the adapter for the mechanical shifter linkage. If your vehicle

has a 3 speed vacuum type shifter, these holes are not going to be used. They will need to be plugged with the

hardware provided and small amount of silicone.

DODGE NV4500 5 SPEED23 SPLINE OUTPUT

TO TOYOTA L/C 16 SPLINE

Advertising