Advance Adapters 50-2401 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-2401
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711024NS-6
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-22-12
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
OPTIONAL ITEMS:
Qty Part No. Description
1 716003 CROSSMEMBER MT
1 716302 SEAL BRG.
1 716001 or
716002
BEARING RET.
1 716009 FRONT YOKE KIT
STOCK OUTPUT
SHAFT
GM TRUCK 4SP MODEL SM420 TO
JEEP & SCOUT DANA 18/20 SPUD DSGN
1. 1 51-1201 CASTING (Ref: 711112NS)
2. 1 52-4700 SPUD SHAFT W/6 TOOTH
3. 1 716224 MOUNT BLOCK
4. 1 716453 SNAP RING
5. 1 716454 SET COLLAR
6. 1 716508 GASKET (GM #384-9472)
7. 1 716568 GASKET
8. 8 723722 H.H.C.S. 3/8"-16 x 1-1/4" LG.
9. 2 723733 H.H.C.S. 3/8"-16 x 2-1/4" LG. (for additional mount block)
10. 2 724342 F.H.S.C.S. 7/16"-14 x 2-1/2"
11. 2 724351 7/16"-14 x 1/2" SET SCREWS
12. 1 728701 NYLON LOCK NUT
13. 1 JP001 JEEP INSTRUCTION MANUAL