Advance Adapters 50-5304 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-5304
P.O. Box 247, 4320 Aerotech Center Way Old Part No:
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 01-17-11
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.
INSTALLATION INSTRUCTIONS:
This coupler shaft fits into the stock GM TH350 to NP205 adapter housing or can also be used with our 50-5302 adapter
housing. It is designed to couple the 4WD TH350 transmission output shaft to a NP205 that was previously coupled to
a SM465 transmission 10 spline. The seal is installed into the coupler with the spring side exposed towards the transfer
case.
1. 1 52-9501 27 SPLINE TH350 x 10 SPLINE NP205 ADAPTER COUPLER
2. 1 716727 SEAL
27 SPL. TH350 3 SPEED AUTOMATIC TO
10 SPL. NP205 TRANSFER CASE
These two seals are the
stock seals or can be
purchased from us under the
part number listed below