Advance Adapters 50-6403 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-6403
P.O. Box 247, 4320 Aerotech Center Way New Item: (11/93)
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-14-01
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete
your conversion, we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly
of Advance Adapter components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams
and other related equipment. These manuals are normally available at automotive dealerships and parts stores.
1. 1 51-6400 ADAPTER HOUSING (Ref: 711164) (Assembled by AA)
2. 1 52-3200 OUTPUT SHAFT (Ref: 711332)
3. 1 52-6301 SPUD SHAFT (23 Splines) (Assembled by AA)
4. 1 716308 BEARING (#6209) (Assembled by AA)
5. 1 716450 SNAP RING (GM #378-5205) (Assembled by AA)
6. 1 716456 SNAP RING (Assembled by AA)
7. 1 716510 GASKET (GM #862-4709)
8. 1 716517 GASKET
9. 6 723701 HEX NUT 3/8"-16
10. 6 723704 3/8" LOCK WASHERS
11. 6 723711 STUD BOLT 3/8"-16 x 2" LG
12. 6 723722 H.H.C.S. 3/8"-16 x 1-1/4" LG
13. 1 JP001 JEEP INSTRUCTION MANUAL
OPTIONAL ITEMS:
No. Qty Part No.
1 716008 CROSSMEMBER MT
This kit is for replacing the AX15 5-Speed transmissions.
GM TH400 AUTOMATIC TO
JEEP NP231 TRANSFER CASE-23 SPLINES