Advance Adapters 50-6801 - Manual

KIT CONSISTS OF:
No. Qty Part No. Description
ADVANCE ADAPTERS INC. P/N: 50-6801
P.O. Box 247, 4320 Aerotech Center Way Old Part No: 711068-21
Paso Robles, CA 93447 PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 03-27-13
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a
service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive
dealerships and parts stores.
1. 1 51-6800 CASTING (Ref: 711168)
2. 1 52-6801 TH350 SHAFT (23-SPLINES) (Ref: 711368-23)
3. 1 716096 NP207 INPUT GEAR 23 SPLINE
4. 1 716062 NYLON BUSHING FOR T350 OUTPUT SHAFT (CUSTOMER MUST INSTALL)
5. 1 716511 O-RING
6. 1 716729 NAT. SEAL #456057 (C/R#19237) (DUAL LIP)
7. 1 716517 GASKET, NP208 T/C
8. 3 723704 3/8" LOCKWASHERS
9. 1 723721 H.H.C.S. 3/8"-16 x 1" LONG
10. 4 723729 S.H.C.S. 3/8"-16 x 1-3/4" LONG
11. 2 723730 S.H.C.S. 3/8"-16 x 1-1/4" LONG
GM TH350 AUTOMATIC TO JEEP NP207
T/C (21-SPL) upgrading to a 23-SPL
** FOR NP231 TRANFER CASES WITH 21 SPLINE **
KIT 50-6804 FITS NP231 T/C'S UP TO 1995
KIT 50-6805 FITS NP231 T/C'S 1995 AND NEWER