Advance Adapters 50-8410 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N: 50-8410
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 3 OF 4
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 08-01-03
GM 700R-4 AUTOMATIC TO BORG-WARNER
1350 & 1354 TRANSFER CASE
7. It is best to install the transmission into the
vehicle now.
8. Lift the transfer case into position, aligning the
center index, and the offset dowel pin.
9. Reinstall the Ford tailhousing adapter to transfer
case bolts.
10. Install the crossmember and mount to the two
tapped holes in the bottom of the AA adapter.
11. Mount the transfer case linkage bracket (Part
No. 715546) and shift linkage (if you will be
using manual shift linkage).
12. Mount driveshaft and other remaining hardware.
13. Route the transfer case breather hose.
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.