Advance Adapters 713098 - Manual

ADVANCE ADAPTERS INC. P/N 713098
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 11-12-10
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
HEMI V8
TJ WRANGLER MOTOR MOUNTS
1. 2 713092A BOLT SLEEVE
2. 4 713092B MOTOR MOUNT BUSHING
3. 1 713092C MOTOR MOUNT FRAME FIXTURE
4. 1 713092L MOTOR/TJ FRAME MOUNT (Driver’s)
5. 1 713092R MOTOR/TJ FRAME MOUNT (Passenger)
6. 4 713092S SPACERS FOR TJ MOUNTS
7. 1 713098L ENGINE MOUNT (DRIVERS 7” BLOCK MOUNT)
8. 1 713098R ENGINE MOUNT (PASS.)
9. 7 720073 10mm - 1.5 x 25mm H.H.C.S.
10. 8 720038 10mm LOCK WASHER
11. 1 720011 10mm X 1.50 NUT
12. 1 720071 10mm - 1.5 x 35mm STUD
13. 4 725003 1/2” FLAT WASHERS
14. 2 725005 1/2”-13 NYLON LOCK NUT
15. 2 725027 1/2”-13 x 5” H.H.C.S.
Hemi TJ Swap Information:
The Dodge truck engine is the most preferred engine with the 545RFE automatic transmission. If a non 4WD
transmission is obtained, the tailhousing can be changed without disassembling the transmission. Jeep TJ’s from 1997
to 2000 will not be able to use the stock instrument cluster. The Jeep instrument cluster from 2001-2006 4 & 6 cylinder
engines works fine with the Hemi engines.
Optional items:
P/N 716601 Hemi exhaust manifolds
P/N 716688-AA Hemi engine with automatic transmission
P/N 716688-AB Hemi engine with manual transmission
P/N 716607 A/C lines kit
P/N 716609 Gas Pedal bracket
Hemi Requirements and Recommendations:
The Jeep TJ must have at least 1” of body lift before starting and we recommend a 3” or greater suspension lift
with adjustable bump stops.
This motor mount is designed to work with a 1997-2006 4 cylinder steering bracket, Part#
52058855AB. If your replacing a 6 cylinder, you will need this Jeep part number.
Note: The 10MM stud is used for upper rear block mount on the passengers side of the block.