Advance Adapters 716007 - Manual

ADVANCE ADAPTERS INC. P/N: 716007
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-24-08
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No.
Qty Part No. Description
1. 1 716007-PLT CROSSMEMBER ADAPTER PLATE
2. 4 715523-SP SPACERS FOR AX15 TRANSMISSION
(install between the transmission and the crossmember mount plate use P/N 724323 )
3. 2 724303 7/16" LOCK WASHER
4. 2 724304 7/16" NUT
5. 4 724322 7/16"-14 x 1-1/4" F.H.C.S.
6. 4 724323 7/16"-14 x 1-1/2" F.H.C.S.
CROSSMEMBER MOUNT NV3550 & AX15 TO
PEUGEOT RUBBER MOUNT
This is an adapter mount that bolts to the NV3550 or AX15 transmission and allows you to retain the stock Peugeot
muffler support and rubber mount. This plate offsets the Peugeot rubber mount forward from the NV3550 or AX15
mount holes to line the rubber mount with the stock slots in the crossmember. The stock slots in the crossmember
support may need to be elongated slightly.