Advance Adapters 716004 User Manual
Crossmember assembly for toyota land cruisers
ADVANCE ADAPTERS INC.
P/N: 716004
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 1
Telephone: (800) 350-2223
Fax: (805) 238-4201
Page Rev. Date:
02-28-01
SPECIAL NOTE:
The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No.
Qty
Part No.
Description
1.
1
716003 Kit
MOUNT
2.
1
716004-1
CROSSMEMBER BAR
3.
1
716004-2
LONG FRAME BRACKET
4.
1
716004-3
SHORT FRAME BRACKET
5.
6
724301
7/16" LOCK NUT
6.
6
724302
7/16" FLAT WASHER
7.
6
724303
7/16" LOCK WASHER
8.
2
724309
H.H.C.S. 7/16" X 2"
9.
4
724311
H.H.C.S. 7/16" X 3-1/2"
10.
2
725002
1/2" LOCK WASHERS
11.
4
725003
1/2" FLAT WASHERS
12.
2
725004
1/2"-13 HEX NUT
13.
2
725030
H.H.C.S. 1/2"-13 X 2-1/2" LONG
ADJUSTABLE 26" - 29" INCHES
TRANSFER CASE FRONT OUTPUT
#716003
MOUNT ASSEMBLY INCLUDED
SHORT SIDE FRAME BRACKET
ON DRIVER'S SIDE
1/2" BOLTS DRILLED AT ASSEMBLY
LONG SIDE FRAME BRACKET ON
RIDER'S SIDE
LAND CRUISER
FRAME RAIL
LAND CRUISER
FRAME RAIL
CROSSMEMBER ASSEMBLY FOR
TOYOTA LAND CRUISERS
BOLT OR WELD FRAME BRACKETS TO THE INSIDE OF
THE FRAME RAILS USING THE 3-1/2" LONG BOLTS