Advance Adapters 716638 - Manual

ADVANCE ADAPTERS INC. P/N: 716638
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 10-28-96
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 716030 SPEC. BALL PIVOT 7/16"-14 THREADS
2. 2 716031 NEW JEEP REPLACEMENT BUSHINGS
3. 2 716037 STEEL STRAPS
4. 1 716139 CLUTCH FORK WEDGE
5. 1 716638-BLK MOUNTING PLATE
6. 4 723704 3/8" LOCK WASHER
7. 2 723719 3/8"-24 JAM NUT
8. 2 723724 3/8"-16 x 1-3/4" H.H.C.S.
9. 2 723739 3/8"-16 x 1" H.H.C.S.
10. 1 725002 1/2" LOCK WASHER
11. 1 725030 1/2"-13 x 2-1/2" H.H.C.S.
SPECIAL NOTES:
1. All original linkage and connections must remain as illustrated.
2. New nylon ball pivot bushings have been furnished since we have experienced severe wear on the original clutch
tube.
3. Grease assembly before operation.
4. Adjust linkage for proper release bearing clearance. Refer to your Jeep service manual for the adjustment procedure.
5. Both pedal and release arm springs must be re-used.
6. These kits are for all Jeep CJ models, Cherokee, and Jeep truck vehicles.
JEEP CLUTCH CONTROL MOUNTING BRKT.
1973-87 USING CHEVY V8 ENGINES