Advance Adapters 716127 - Manual

ADVANCE ADAPTERS INC. P/N: 716127
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447
PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 02-24-99
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.
KIT CONSISTS OF:
No. Qty Part No. Description
STOCK DASH
DASH BRACKET
PART NO. 716246
KNOB
PART NO. 722509
PART NO. 716245
JEEP CJ5 WINDSHIELD HOLD DOWN
BRACKET ASSEMBLY (ROUND FENDER)
1. 2 716195 KNOBS
2. 2 716245 BRACKET
3. 2 716246 DASH BRACKETS
4. 6 722509 1/4"-20 x 1-1/4" H.H.C.S.
5. 4 722512 1/4"-20 x 1" F.H.C.S.
INSTALLATION INSTRUCTIONS:
1. With the old brackets removed, bolt the new dash brackets to the
dash with the two flat head screws provided.
2. Bolt the windshield brackets to windshield as illustrate.
3. Install knob into opening and thread into dash bracket.