IKA EUROSTAR 20 high speed control - Manual (Page 9)

9
Working screen at the time of delivery:
Explanation of symbols on the working screen:
The symbols displayed change depending on the
status and settings of the Wireless Controller. The
screen below shows the most significant symbols on
the working screen.
The start screen appears for a few seconds after the
Wireless Controller is switched on. The device name
and the software version are displayed. After this,
the following working screen appears automatically
in the display.
Note: The wireless symbol appears only when
the stirrer (station) is switched on.
Bluetooth ® :
This symbol means the EUROSTAR station and the Wireless Con-
troller are communicating via Bluetooth
® .
The symbol no longer appears if no Bluetooth ® communication is
being performed.
Key:
This symbol means that the function of the buttons and of the rotary
knob for controlling the Wireless Controller are disabled.
The symbol no longer appears if the functions are enabled once
again by pressing the key button a second time.
B Operating mode:
This symbol indicates the operating mode currently selected (A, B, C).
USB:
This symbol means the EUROSTAR station is communicating via a
USB cable.
The symbol no longer appears if no USB cable is being used for com-
municating with the station.
B
0
0
actual rpm
set rpm
Torque:
0
Ncm
Reset Torque  Back
Timer:
00:00:00
B
300
99:00:00
actual rpm
rated rpm
45.0
ºC
20
Ncm Torque:
Temp.:
Timer:
00:00
PC
controlled
LIMIT
6000
Home:
This symbol means that the Wireless Controller is connected to the
EUROSTAR station and is communicating with the EUROSTAR
station via the charging contacts.
The symbol no longer appears if the Wireless Controller is removed
from the EUROSTAR station.
Battery pack (rechargeable battery):
This symbol indicates the charging status of the RB 1 battery pack
within the Wireless Controller.
The charging symbol appears if the Wireless Controller
- is connected to a PC via a USB cable
- is connected to a EUROSTAR station via a USB cable
- is connected to the power supply unit OS 1.0 via a USB cable
- is connected to the EUROSTAR station via the charger contacts.
LIMIT Speed limit:
This symbol indicates upper speed limit set for the stirrer. The setting of
the EUROSTAR in delivery status is the maximum permissible speed
of the stirrer.
Temperature sensor:
This symbol appears when the temperature display is active in the
display.
PC
controlled
PC control:
This symbol means that either the EUROSTAR station or the Wireless
Controller is connected to a computer and the stirrer is being con-
trolled from the computer.
PR
controlled
Program control:
This symbol means EUROSTAR is controlled by user defined program.
Continuous mode:
This symbol indicates that the stirrer is in continuous mode and indi-
cates the direction of rotation of the stirrer.
00:00
Intermittent mode:
This symbol indicates that the stirrer is in intermittent mode.
Navigation controls in
the menu
B
N
O
Navigation menu and menu structure
Navigation menu
Navigation menu:  Press the “Menu“ button (N) and turn the rotary/push knob (B)
 Press the "Back" button (O) or the "Menu" button (N)
Note: If you press the “Menu“ button (N), the system skips directly back to the working screen.
If you press the “Back“ button (O), the system skips back to the previous display.
Menu
Tempe
Stirring
Torque Calibration
Stirring
Intermittent Mode
Torque Display
Torque Limit
Speed Limit
 Press the "Menu" button (N).
 Select the menu by turning the rotary/push knob (B) to the right or left to select the desired menu or sub-
menu, which can then be selected by pressing the rotary/push knob.
 Press or turn the rotary/push knob (B) again to select the desired menu option and edit the values or settings,
or activate/deactivate a function.
 Turn the rotary/push knob (B) to "OK" and press the "Back" button (O) or "Menu" button (N) to end the
procedure and return to the previous menu or working screen.
Note: The menu option activated is highlighted yellow in the display.
B
0
0
actual rpm
set rpm
Torque:
0
Ncm
Reset Torque  Back
Timer:
00:00:00
 Stirring
Speed Limit
Speed Limit
6000
rpm
OK
Menu
Back
Menu
Back Back