IKA C 2000 control - Manual (Page 62)

(YDOXDWLRQ RI JURVV FDORULILF YDOXH GHWHUPLQDWLRQV
IKA  -WERKE C 2000 basic / control Ver. 04 08.07
3DJH 
FDO
The experiment was performed for calibration.
6LP
The experiment was a simulation.
(YDO
The experiment was evaluated.
– Code Eval: the DIN/IKA evaluation procedure was used.
– Code ASTM: the ASTM D1989, D240, D5865, D4809, D5468,
E711 evaluation procedure was used.
ZDLW
The fuel sample is in the crucible, entry of parameters is complete,
and the experiment can be started.
3UHS
The crucible is situated in the sample rack with a fuel sample.
UXQ
The experiment is currently being processed in the measuring cell.
The buttons have the following functions:
6HO Marks an experiment in the list. Exception: calibration
$OO Marks all experiments (max. 100 experiments) in the list.
Exception: Experiments with status FDO and 3UHS
3UL Prints the list of experiments
'HO Deletes the experiments that have previously been marked with 6HO
or $OO Exception: FDO ; 3UHS
,QIR Opens an information window with the experiment parameters
&DOF Opens a dialog box to convert the results of the experiment into
different reference states
You can use the 8S DUURZ'RZQ DUURZ keys to select the experiment from the list
that you want to post-process. With 7DE you can then move the cursor from the list
field to the buttons.
To confirm the buttons, either place the cursor on a button with 7DE and click on 2.
or press the key with the appropriate number button on the numeric keypad.
e
Place the cursor on the experiment that was just completed and confirm with the
,QIR button. An information window opens with the results of the experiment.