Eppendorf epMotion 96 User Manual
Epmotion
Advertising
Table of contents
Document Outline
- epMotion® 96
- Table of contents
- 1 Operating instructions
- 2 Product description
- 3 Safety
- 4 Installation
- 5 Software
- 6 Operation
- 6.1 Switching the device on and off
- 6.2 Starting the software
- 6.3 Inserting pipette tips
- 6.4 Moving the lifting table
- 6.5 Aspirating liquid
- 6.6 Dispensing liquid
- 6.7 Inserting the plate
- 6.8 Mode Pipette – Dispensing liquid
- 6.9 Mode Multidispense – Muliple dispensing of liquid
- 6.10 Mode Pipette and Mix – Dispensing and mixing liquid
- 6.11 Mode Manual Pipette – Dispensing liquid manually
- 6.12 Mode Dilute and Mix – Mixing liquid
- 6.13 Mode Multiaspirate – Multiple aspiration of liquid
- 6.14 Mode Run Program – Creating and storing a program sequence
- 6.14.1 Creating and storing a program sequence
- 6.14.2 Editing the program sequence – Adding a mode at the end
- 6.14.3 Editing the program sequence – Inserting a mode
- 6.14.4 Editing the program sequence – Changing the parameters of a mode
- 6.14.5 Changing the order within a program sequence
- 6.14.6 Deleting a mode from the program sequence
- 6.14.7 Selecting and running a program sequence
- 6.15 Mode Settings – Setting the setting the system properties
- 6.16 Updating the software
- 7 Troubleshooting
- 8 Maintenance
- 9 Technical data
- 10 Transport, storage and disposal
- 11 Ordering information
- Certificates