Eppendorf BioSpectrometer fluorescence - Manual (Page 28)

Operation
Eppendorf BioSpectrometer
® fluorescence
English (EN)
28
5.3.2.5 Finalizing the method
5.3.2.6 Optional: process results
5.3.2.7 Printing and exporting
1. Press [Finish], to complete the measuring series
and return to the method selection.
2. After all measurements have been completed,
switch off the device and close the cuvette shaft
cover to protect the cuvette shaft from
contamination.
For some methods, you can postprocess the results
in the
process results method step. For example,
you can use the SpectraZoom zoom function in the
spectra.
 Use the and cursor keys for selecting
systematically any results of the series of
measurement for postprocessing.
1. Compose data packets for all samples or for
selected samples.
2. Print the data, save them to a USB stick or
transfer them to a PC via a USB cable.