Eppendorf piezoxpert™ — operating manual – Eppendorf PiezoXpert User Manual
Page 15
Advertising
Eppendorf PiezoXpert™ — Operating manual
15
3. Tighten grip head into the front knurled screw.
4. Bring the capillary into the microscope focus range.
2. Push the capillary into the grip head as far
as it will go.
5. Rotate the front knurled screw to align the
angled capillary.
Hint!
Use the straight or angled capillaries with an angle up to 25°. If you would like to use
polished capillaries with spikes, check their aptitude using pretests.
EN
Operating manual
Advertising